www.valvedepot.com     Catalogue#120050999    Contact us    BACK

Hydraulic Valve Specialist 
Hydraulic Valve Specialists


Flow Regulating Valves

Flow Regulators

    Features

  • Variety of flow ranges.
  • Pressure compensated.
  • Regulated flow with free reverse.
  • SID series (surges internally dampened for shock supression)
  • Low pressure drop.
  • Variety of threads and sizes.

    • Typical Applications

  • Speed control for mobile and industrial applications.

Technical Specifications

Types In-Line and Cartridge styles (slip-in and threaded)
Body Sizes 1/8" through 1-1/2"
Thread Options NPTF, SAE, JIC, ORS, BSP
Operating Pressure Up to 5,000 psi
Flow Rate Up to 100 gpm
Material Steel, aluminum or stainless steel


Velocity Fuses

Velocity Fuses

    Features

  • Fast acting.
  • Fail safe with complete shut-off.
  • Wide variety of flow settings.
  • Low pressure drop.

    • Typical Applications

  • Full shut-off in event of broken line or surge.
  • Prevent pump from seizing after start-up due to oil drainage.
  • Aerial lifts and material handling market.

Technical Specifications

Types In-Line and Cartridge styles (slip-in and threaded)
Body Sizes 1/8" through 1-1/2"
Thread Options NPTF, SAE, JIC, ORS, BSP
Operating Pressure Up to 5,000 psi
Flow Rate Up to 100 gpm
Material Steel, aluminum or stainless steel


Pressure Controllers

Pressure Controls

    Features

  • Fast response time.
  • Hardened internal parts.
  • Low leakage.
  • Special products including dual crossover and free reverse flow relief.
  • Variety of pressure settings.

    Typical Applications

  • Maintaining maximum system pressure over various flow conditions.
  • All hydraulic systems.

Technical Specifications

Types In-Line and Cartridge styles (slip-in and threaded)
Body Sizes 1/8" through 1-1/2"
Thread Options NPTF, SAE, JIC, ORS, BSP
Operating Pressure Up to 10,000 psi
Flow Rate Up to 40 gpm
Material Steel, aluminum or stainless steel


Flow Limiters

Flow Limiters

    Features

  • Allows metered flow after closing.
  • Fast acting, fail-safe.
  • Variety of flow settings.
  • Low pressure drop.

    Typical Applications

  • Provides partial shut-off when excess flow occurs.
  • Reduces shock where full line shut-off is undesirable.
  • Aerial lifts and material handling market.


Technical Specifications

Types In-Line and Cartridge styles (slip-in and threaded)
Body Sizes 1/8" through 1-1/2"
Thread Options NPTF, SAE, JIC, ORS, BSP
Operating Pressure Up to 5,000 psi
Flow Rate Up to 100 gpm
Material Steel, aluminum or stainless steel


Directional Valves

Directional Valves

    Product Types

  • Check Valves: Ball & Poppet
  • Single & Double Pilot Check Valves
  • Flow Dividers
  • Logic Valves
  • Shuttle Valves
  • Custom Directional Valves

    Features

  • Low pressure drop.
  • Variety of threads and sizes.
  • Variety of cracking pressures.
  • Special seals available.
  • Metal to metal seat.
  • Stainless steel spring.
  • Heat-treated internals.

    Typical Applications

  • All hydraulic applications in the mobile and industrial marketplace.

Technical Specifications

Types In-Line and Cartridge styles (slip-in and threaded)
Body Sizes 1/8" through 1-1/2"
Thread Options NPTF, SAE, JIC, ORS, BSP
Operating Pressure Up to 5,000 psi
Flow Rate Up to 100 gpm
Material Steel, aluminum or stainless steel

Integrated Manifolds

Cartridge Valves & Integrated Manifolds

    Features

  • No-leak, screw-in componentry. Fast and easy valve removal.
  • Reduced plumbing requirements saves on cost.
  • Custom designed manifold blocks machined from aluminum or steel.
  • Special designed valves and blocks on request.
  • Cartridge valves and manifold blocks save space and improve serviceability.

    Thread Options

  • SAE, industry interchange cavities.

    Flow Rate

  • Variety of flow rates.

    Material

  • Steel cartridges and aluminum manifold blocks.

    Typical Applications

  • Mobile applications such as fork lift, aerial lift, cranes, scissor lifts, etc.
  • Industrial applications such as hand tools, power units, etc.

Custom Capabilities


Custom Capabilities

    Types

  • Shuttle Valves
  • Priority By-Pass Valves
  • Lock Valves
  • Offset Shuttles
  • Spool Valves
  • Externally Actuated Valves
  • Custom Integrated Manifolds

    Thread Options

  • NPTF
  • SAE
  • JIC
  • ORS
  • BSP
  • Variety of International Threads

    Body Sizes

  • Full Range

    Operating Pressure

  • Up to 10,000 psi

    Flow Rate

  • Up to 150 gpm

    Material

  • Steel, aluminum or stainless steel

    Features

  • Special designs to meet customer specifications.
  • Manifold blocks designed, machined and manufactured to specifications.

    Typical Applications

  • A wide variety of industrial and mobile applications.